Laser Tools verses Laser Therapy Systems Part VII

Why should you have to create your own therapy system?

Many people call and ask what is different from our Low Level Laser Therapy units than others on the market or why do we think our lasers are superior to others on the market? This is not a simple answer because in my opinion we are superior in so many ways.

First we have to explain that we do not even try to compete with most forms of laser therapy sold today, infrared, violet and ultraviolet, or any wavelength other than 635nm or any other light source other than laser as they are completely different than the therapy we strive to create. We only utilize a form of light that is used to deliver and manage information and part of Natural Energy Medicine as described in the previous 6 articles. Any other form of light therapy does not apply to our equipment or these articles.

Then for those manufacturers that do build and sell natural pulsed LLLT units, most are just selling a tool used for Natural Energy Medicine. Furthermore these laser tools meet no set standards for function. For example: They sell a tool that they claim will run a 635nm laser diode and pulse it at some given pulse frequency. But they will not tell you what the precision of that selected frequency will be or the range of the frequencies their unit will produce. They will also not tell you what frequency you should use for what condition, or where to place the laser or for how long. Since this is a problem for most users many manufacturers will hire a third party doctor to give seminars on their personal laser therapy procedures for additional fees. Occasionally you will find pulsed therapy lasers that do input their own proprietary frequencies and therapy programs into their laser. Unfortunately these therapy programs are extremely limited and these units seldom if ever allow the user to place their own frequencies into the system. This limits the therapy options significantly and this also means these units cannot be utilized for other laser therapy procedures taught by third party physicians.

All of this would be adequate for many different health care products or other commercial products that have set acceptable standards for use and function. Everyone would know what they are purchasing and chose what they wanted to spend based on the known standards for the product. When you purchase a car you can shop wisely because you know the difference in the quality, you know your needs and you know your budget. However, pulsed LLLT units have no universally known set standards, no standard of precision or range of pulse frequencies, no acceptable therapy standards, and no set standards for how they should work. Unfortunately not even the manufacturers or the experts in the field of LLLT know what the standards should be. So how is the buyer supposed to shop wisely? How are they to know that the product they are buying even works beyond what the salesperson tells them. And when the doctor does not obtain the results that he was told to expect is it his fault because he is doing the therapy procedure incorrectly, or should he take other seminars and learn other procedures that may work better, or is it the therapy laser that does not work correctly, or is it that laser therapy itself just does not work that well? And how can any doctor figure this out on their own?

There are many different instructors that specialize in laser therapy and teach their own therapy procedures. These techniques are based on the quality of the procedure and the doctor’s ability to perform that procedure. It is not dependent on the quality of the therapy laser itself. We look at this a little differently. The last time we looked it was called Low Level Laser Therapy (LLLT). We believe the laser should be the primary therapy tool not an ancillary tool that supports a procedure. Because regardless of the quality of the procedure no physician or technique can duplicate the therapeutic effects of a quality Pulsed Low Level Laser.

What makes up a True Pulsed Low Level Therapy Laser?

True Low Level Lasers have been described in detail in the previous articles so we will only give a brief description here.

1. First they must utilize a very high quality 635nm laser diode. By very high quality we mean that the light that is being produced is not only from a laser diode but emits exactly 635nm light with a variance of 2 to 3nm based on temperature and weather. This is the difference between a 25 cent laser diode and a $200.00 laser diode. Unfortunately you as the user cannot tell the difference between the two laser diodes so beware of your manufacturer.

2. Next each laser diode must be powered between 0.5mW to 5mW.

3. Next each laser diode in the therapy unit must be pulsed. Few realize the importance of frequency therapy but it literally determines the intellectual level that you can communicate with the body. The pulsed frequency or hertz is the number of times each laser in the unit is turned off and on in one second. Natural Energy Medicine is about managing and delivering information in the body and pulse frequency is information. It is the basis of how one person talks to another and how the body communicates with itself. So not any pulse frequency will do, it has to be with enough precision and range to be able to communicate with the body at a significant level. Different electronic components will have different capacities for both range and precision of pulse frequencies. A minimal frequency range for a pulsed Low Level Laser is considered to be at least one million hertz or pulses per second. Which means that the unit should be able to produce any frequency up through 1MHz at a precision that is therapeutically functional. If the electronics in your pulsed LLLT unit is less than this range and precision then you do not have a true pulsed Low Level Laser. Or at least your therapy laser does not have the capacity to perform frequency therapy or produce frequency biomodulation of any significance in the body.

This is the basic minimum requirements for a pulsed laser to perform Natural Energy Medicine. Unfortunately very few pulsed therapy lasers have the technology to produce the range and precision of pulsed frequencies to meet this minimum requirement. Why? This technology constitutes about 95% of the cost of any pulsed low level laser and with few that recognize the importance of this technology it is usually the first place cost cuts take place. Which means they have very limited use in Natural Energy Medicine. However, regardless of the technology, pulsed Low Level Lasers are still just a tool at this point. Tools are necessary but their value is limited to your ability or knowledge as to how to use them. When I went to Chiropractic College I arrived with the tools I needed, my mind and my hands. But that did not make me a doctor. I had to learn how to utilize those tools and was taught acceptable chiropractic procedures and techniques that met standards of care for the chiropractic profession. And as a doctor it was my job to treat patients with those proven standards of care. I was not told to figure it out on my own or even talk to other doctors that had figured it out on their own through trial and error and see if it works. So why should I expect that level of education for Natural Energy Medicine.

After developing a quality pulsed therapy laser tool, what else is necessary to turn a laser tool into a laser therapy system?

Frequency Therapy:

1. Unique Frequencies for each therapy laser: For the past 10 years we at LazrPulsr System have been developing laser therapy systems, not procedures that require a laser but a lasers that require a procedure. The electronics of each pulsed laser on the market is unique and will have its own limitations and error rate for frequency generation. Therefore to utilize the full potential of each pulsed therapy laser requires developing its own frequency list that utilizes the full range and precision of frequencies that the laser can produce. Then based on these frequencies, therapy programs can be developed for this therapy laser.

2. Which frequencies should you use for which conditions: The latest research in bio resonance or the bodies electromagnetic frequencies published by a company called Sensitiv Imago out of the Ukraine states that there are three different frequency bands the body utilizes. Basic frequencies – 7.8 and 14.1 Hz – are the frequencies of alpha – and beta-rhythms in the brain. They practically coincide with fluctuations in Earth’s magnetic field. Supporting frequencies which I believe are the natural resonant frequencies of each cell type, organ, or system. Then the energy-informational frequencies of cell exchange are 40-70 GHz (equivalent to 40-70 billion cycles per second). This is perhaps the most important for the human range of frequencies as these frequencies are the band width that the body uses to communicate with and control itself. Currently the best way science has found to present these frequencies to the human body is to pulse 635nm coherent light (laser) at matching octave frequencies since the band of 40-70 GHz is far beyond the ability of science to duplicate. Therefore each cell type, organ, tissue or system has specific frequencies within three band widths that can be corrupted or lost. Identifying the frequency that most closely matches the closest octave of each of these frequencies for each organ, tissue, etc. that your therapy laser has the capacity to produce determines the frequencies that you should be using for that individual therapy laser.

3. Frequency and therapy programs: Once you have the frequencies identified for your therapy laser then you should determine which frequencies can be utilized together when using a therapy laser that has more than one laser diode. This is similar to matching musical notes to create a chord in music. Then you must determine which frequency groups to run in which order to create a therapy program for each tissue you are treating.

4. What are those frequencies: Again there is no one frequency list for the human body. Each therapy laser requires its own. Since the engineer of the therapy laser is the one that knows the exact precision and range of frequencies their laser can produce they need to work with a specialist in human bio resonance and determine the correct frequency list for all the different systems and organs for their specific therapy laser.

Homeopathy:

Homeopathy is a very powerful form of informational medicine. Incorporating homeopathy into your therapy system is a vital component of Natural Energy Medicine or any form of laser therapy.

Reflexology:

The body has many reflex points which all relate to different organs and systems. Knowing which of these specific points to place the laser for each therapy program creates the most efficient therapeutic results.

Low Level Laser Therapy or more specifically, Natural Energy Medicine should be recognized as the most advanced form of health care for many traumas and disease processes that are currently untreatable. However until there are set standards for not only the equipment used but the therapy procedures, Natural Energy Medicine will remain as an investigational form of care, not covered by insurance and not recognized as a true form of health care. Remarkably it is the manufacturers, instructors, and operators that hold Natural Energy Medicine where it is by refusing to recognize or demanding standards for their profession.

Any new therapy system, especially one that holds new, advanced and unknown properties such as lasers and light will attract many new manufactures and they will ride the wave of a new product idea. Unfortunately most of them know very little about what they are manufacturing but they want to ride that wave until that wave dies out. Or putting it another way, don’t stop doing what makes you money until it stops making you money. And this wave will not die until the users start demanding documentation and research on their products. Only you the doctors and operators of Low Level Laser therapy systems can hold the manufacturers responsible for what they make. You as the buyer of any LLLT system or Natural Energy Medicine system deserve to know exactly what you are buying. Not only is this a significant monetary investment, but even more importantly, the quality of your health, the health of your family and your patients depend on your decision. As a doctor it is not your job to develop your own Natural Energy Medicine therapy system. So don’t settle for just an overpriced tool that may or may not meet any acceptable standards required for true Natural Energy Medicine therapy. Demand a fully documented Natural Energy Medicine therapy system.

All articles provided by Dr Gerry Graham and LED Healing Light.